Workshop on Applied Engineering Statistics:
Statistical Process Control (SPC), ANOVA & Design of Experiments (DOE)
LAWRENCE TECHNOLOGICAL UNIVERSITY
October 15, 2014, 8:00am – 5:00pm
Ahad Ali, Lawrence Tech
Steven Sibrel, Harman International and Chair-Elect, ASQ Greater Detroit
Event Time, Date, and Location
Wednesday, October 15, 2014 from 8:00 AM to 5:00 PM
Marburger Science and Engineering Auditorium (S100)
Lawrence Technological University
21000 West ten Mile Road
Southfield, MI 48075
View Map: http://www.ltu.edu/map/ (Building # 14)
A training certificate will be provided
Professional Development Equivalent to .8 CEU
Breakfast and Lunch will be provided.
Registration fee $50.
7:00 Continental Breakfast and Networking
8:00 “Random Variables, Statistical Distributions: Discrete and Continuous”, Dr. Sabah Abro, College Professor, and Program Director, Master of Science in Engineering Technology, Department of Engineering Technology, Lawrence Technological University
9:20 “Using SPC in Continuous Improvement”, Steven Sibrel, Principal Supplier Quality Engineer, Harman International, Novi, MI and Chair-Elect, ASQ Greater Detroit
10:15 Tearesa L Wegscheid, Reliability Engineer, Whirlpool Corporation, Benton Harbor, Michigan
11:00 "Case Studies on Hypothesis Testing and Confidence Intervals", Dr. Ahad Ali, Associate Professor and Director, Master of Engineering in Manufacturing Systems sand MSIE Program, Director, Smart Manufacturing and Lean Systems Research Group, Lawrence Technological University
12:00 Lunch Break, University Cafeteria, All You Can Eat
1:00 "Statistical Process Control For Precision Machining - The Correct Alternative to Shewhart Charts", Bob Doering, Quality Engineer, Control Devices Division, Stoneridge Inc., Lexington, Ohio
1:40 'Practical Application of Reliability Techniques for Product Excellence', Kush Shah, Manager of Long Term Reliability – Global Powertrain and Vehicle, General Motors and National Director – ASQ Board of Directors – 2014 & 2015
2:30 "Case Studies using Design of Experiments (DOE)", Dr. Ishtiaq Hussain, Manufacturing Lead, General Motors Corporation, World Headquarters, Pontiac, Michigan
3:30 “Predictive Warranty Management with Paynter Charts”, Jd Marhevko, Vice President of Quality, Lean and EHS Systems, Accuride Corporation
4:10 Panel Session: Workshop Speakers
Dr. Sabah Abro
Department of Engineering Technology
Program Manager for Focus:HOPE
Dr. Abro is an internationally educated Faculty member. He studied at the University of Baghdad to earn a Bachelor degree in Statistics. He holds a graduate diploma from the United Nation’s supported institute of Planning in the Middle East. He went to the University of Wales (University College of Swansea) in the UK for his Masters Degree in Statistics and to Belgium where he was granted a Ph.D in applied Mathematics from the Universite Catholique De Louvain.
He also has international academic experience, he held the position of assistant Professor at Al Mustansiria University in Baghdad, work as a regional expert for the United Nation’s supported Arab institute of Statistics, a position that allowed him to teach in several countries of the Middle East.
Before he joined LTU he served as a Math Program Leader at Focus: HOPE where he was leading the effort of a team from LTU, UDM and WSU to design the math program for the Greenfield coalition for manufacturing engineering education. Dr. Abro also served as an adjunct Faculty at LTU, UDM, WSU and Oakland Community College.
He is also involved in community services, where he led a verity of Educational activities through the Chaldean Federation of America. Dr. Abro is the Founder and the current president of the Mesopotamian American Graduate Association (MAGA). He is married to Ann who is a preschool Educator, has a daughter Hadeel who is a math teacher at Troy Public Schools and pursuing her Ph.D. at WSU. He also has a son, Fadi who is a senior ME student at LTU.
Bob Doering CQM/OE, CQA, CQE, CMI, MBA
Control Devices Division
Bob Doering has been in the quality field for over 16 years. He is currently a quality engineer for an automotive component manufacturing firm. He has industrial experience for over 34 years, many of which were in precision machining of automotive and medical components. He is an adjunct instructor at Lorain County Community College in Engineering Technology and Enrollment Services departments, and has lectured classes in Metrology and Quality Management. He holds associates degrees from Lorain County Community College of Elyria, Ohio and The University of Akron of Akron, Ohio; BA in Business and MBA in Systems Management from Baldwin-Wallace College, Berea, Ohio. He holds CMQ/OE, CQE, CQA, CMI (ASQ) certifications. He has implemented the CorrectSPC concepts in precision machining for over 10 years with significant success.
Dr. Ahad Ali
Director, Master of Engineering in Manufacturing Systems and Master of Science in Industiral Engineering Programs
Director, Smart Manufacturing and Lean Systems Research Group
Lawrence Technological University
"Case Studies on Hypothesis Testings and Confidence Intervals"
Ahad Ali is an Associate Professor, and Director of Master of Engineering in Manufacturing Systems (MEMS) and Master in Science in Industrial Engineering (MSIE) in the A. Leon Linton Department of Mechanical Engineering at the Lawrence Technological University, Michigan, USA. He is the Director of Smart Manufacturing and Lean Systems Research Group. Dr Ali has done research projects with Chrysler, Ford, DTE Energy, Delphi Automotive System, GE Medical Systems, Harley-Davidson Motor Company, International Truck and Engine Corporation (ITEC), National/Panasonic Electronics, New Center Stamping, Rockwell Automation, and Whelan Co. His research interests include manufacturing, simulation, optimization, reliability, scheduling, manufacturing, and lean. He has published journal and conference papers. Dr. Ali is the founder and conference chair of the 2015 International Conference on Industrial Engineering and Operations Management (IEOM) at Hyatt Regency Dubai, March 3-5, 2015. He is member of IIE, INFORMS, SME, IEOM Society and IEEE. He earned B.S. in Mechanical Engineering from Khulna University of Engineering and Technology, Bangladesh, Masters in Systems and Engineering Management from Nanyang Technological University, Singapore and PhD in Industrial Engineering from University of Wisconsin-Milwaukee.
Principal Supplier Quality Engineer
Harman International, Novi, MI
Chair-Elect, ASQ Greater Detroit
Steve Sibrel is a business process improvement trainer, coach and auditor with over 35 years of experience in the business and manufacturing world. He is currently working as Principal Supplier Quality Engineer at Harman International, a manufacturer of audio and infotainment systems for consumer, professional, and automotive industries, with well-known brands such as JBL, Lexicon, Crown, Infinity, Mark Levinson, Becker and Harman-Kardon. Previously he held a number of engineering and management positions in diverse industries at Applied Materials (Semiconductor), NEC (Telecommunications) and Texas Instruments (Military). He has conducted over 200 supplier audits in North America, Europe, and Asia and is a Lead Auditor for ISO/TS16949, ISO9001, ISO13485, ISO17025, and 21CFR820. He has been the Chair for Professional Development for the ASQ Detroit section since 2008. He received the Distinguished Service Award in 2008 and the Leadership Award in 2013 from ASQ. Current ASQ Certifications held are Six Sigma Black Belt, Quality Engineer, Quality Inspector, Quality Auditor, and Manager of Quality/ Organizational Excellence. He is an adjunct facility member at Macomb Community College. Steve has a BSEE degree from Rose Hulman Institute of Technology and an MSEE degree from Southern Methodist University.
Tearesa L Wegscheid
Benton Harbor, Michigan
Manager of Long Term Reliability – Global Powertrain and Vehicle, General Motors
National Director – ASQ Board of Directors – 2014 & 2015
'Practical Application of Reliability Techniques for Product Excellence'
Kush Shah is globally recognized for his expertise, professionalism and outstanding contributions to the field of quality. He has a proven track record for solving tough quality problems. He has demonstrated his unwavering dedication in advancement of organizational excellence by introducing quality concepts for many organizations and individuals that resulted in significant improvement in organizational performance and customer experience.
Kush is currently the Manager of Long Term Reliability at General Motors (GM) effective June 1 2014. He was recognized as GM Professional Fellow for his significant professional contributions and endorsement by both internal and external experts in the field of quality. He has held leadership positions in manufacturing, Manufacturing Engineering, R&D and quality functions over his 30 years at GM. Kush has received the Chairman’s Honor Award, People Make Quality Happen Award, Quality Driver Award and GM Trade Secret Award. He co-authored a U.S. Patent. Kush has led deployment of problem solving methodology that resulted in millions of dollars in cost avoidance.
He has served in many leadership positions at the American Society for Quality (ASQ) including National Director on the ASQ Board of Directors, the Chair of Automotive Division and the Chair of Detroit Section. ASQ serves more than 70,000 quality professionals in 140 countries. Kush was recognized as an ASQ Fellow (< 1% of ASQ members globally receive this distinction). He has received the Distinguished Service Award from Detroit Section and the Judson C. Jarvis Award from the Automotive Division for his leadership and contribution to these organizations. He also received the ASQ Testimonial Award for his outstanding leadership and distinguished service to the Society. He was selected to participate in the development of the first ASQ Certified Six Sigma Master Black Belt (MBB) exam.
He holds many quality certifications through ASQ including Certified Six Sigma Black Belt (CSSBB), Certified Manager of Quality and Organizational Excellence (CMQ/OE), Certified Quality Auditor (CQA), Certified Biomedical Auditor (CBA) and Certified Quality Engineer (CQE). He is also certified as Red X (Statistical Engineering) Master by Shainin LLC. Recently he has received Design for Six Sigma (DFSS) Green Belt Certification from the University of Michigan and then DFSS Black Belt Certification from GM.
In March 2014, Kush Shah was awarded Gold Award by the Engineering Society of Detroit, the most prestigious award that recognizes an outstanding engineer or scientist for their trailblazing efforts and commitment to their professions.
Kush is a preeminent quality professional who has applied his expertise to advance innovative application of quality systems and methodologies to diverse audiences as a mentor, teacher and speaker. He has trained thousands of individuals at all levels of organizations across a variety of businesses globally. He has been a speaker at many global conferences. His contribution to improve healthcare quality was featured in the Detroit Free Press.
Mr. Shah has received Master of Science degree in Mechanical Engineering from the University of Michigan, Ann Arbor and Bachelor of Engineering degree in Mechanical Engineering from Maharaja Sayajirao University, Vadodara, India.
Dr. Ishtiaq Hussain
General Motors Corporation
Pontiac Michigan USA
Dr. Muhammad Ishtiaq Hussain is Adjunct Faculty in Lawrence Tech University. He earned his Doctoral of Engineering in Manufacturing Systems (DEMS) and Master of Engineering in Manufacturing Engineering (MEMS) Degrees in May 2008 from Lawrence Tech University, Michigan, USA. He also earned Master of Science in Quality from Eastern Michigan University in 2003. Dr. Hussain is a certified DFSS Black Belt from General Motors University and CMI from ASQ. He is currently working in General Motors Corporation Headquarter in Powertrain division in USA. Dr. Hussain has expert level knowledge in the following disciplines.
- Design of Experiment (DOE)
- Statistical Process Control (SPC)
- Geometric Dimensioning and Tolerances (GD&T)
- Design for Six Sigma (DFSS)
- Manufacturing Processes & Technology
- Gauging and Inspection (GR&R)
- Process Quality Analysis
- Machining Expert and MQL (green manufacturing) Expert
Dr. Hussain is a source of knowledge to all the GM machining plants. He has launched many New and major GM Powertrain engine programs. Dr. Hussain authored and published several papers in machining and measurement systems.
VP QLMS & EHS
Jd Marhevko is the Vice President of Quality, Lean and EHS Systems for Accuride Corporation. She is a business and operational excellence executive with over 25 years of operations, QA and lean experience in a variety of industries including Automotive, Aerospace, Plastics and Machining. Jd is an ASQ Fellow, a Certified Manager of Quality and Organizational Excellence (CMQ/OE), a Certified Quality Engineer (CQE) and a Certified Six Sigma Blackbelt (CSSBB). She is also a trained Master Black Belt (MBB). Jd has been a senior Baldrige System assessor for the state of Michigan for several years. She holds a Bachelors of Science in Engineering (BSE) from Oakland University in Michigan and a Master’s of Science Administration (MSA) from Central Michigan University. Jd is a Past-Chair of ASQ’s Quality Management Division (QMD), a 24,000 member global professional organization.
Panel Session: Workshop Speakers
Dr. Ahad Ali
Director, Smart Manufacturing and Lean Systems Research Group
Email: email@example.com; Phone: 248-204-2531 (office), 248-252-8194 (cell)